header-grafik-pi-overview
You are here: Optris UKProductsInfrared CamerasPI Precision LinePI 08M

Product Program

  • Overview
  • Technical details
  • Applications
  • Datasheets & manuals
  • Software

Infrared camera for laser applications up to 1900 °CShort-wave IR camera optris PI 08M from 3330

The spectral range of 800 nm of the newly developed thermal imager optris® PI 08M decreases measurement errors resulting from unknown or changing emissivities. Due to the spectral range as well as the continous measurement range from 575 °C to 1900 °C, the compact infrared camera is ideal suited for for almost all NIR and CO2 laser processing applications.

The frame rate of 1 kHz as well as the high optical resolution enable an optimal adaption to the respective application.

Important specifications

  • Special narrow-band spectral response at 800 nm ideal for
    almost all NIR and CO2 laser processing applications
  • Wide measurement range:
    575 °C to 1900 °C without sub-ranges
  • High dynamic CMOS detector with up to 764 x 480 pixels resolution
  • Up to 1 kHz frame rate for fast processes
  • Real-time analog output with 1 ms response time
  • Extensive software package and SDK included
  • Starting from £ 3330 , software
    and I/O interface inclusive

Product configurator

Technical details of the optris PI 08M

 

  • Scope of supply:

    USB camera incl. 1 lens,
    Lens tube with protective window,

    USB cable (1 m),
    table tripod,
    PIF cable incl. terminal block (1 m),
    software package optris PIX Connect,
    carrying case Alu
    optional: CoolingJacket, high temperature cable

  • Detector: CMOS (15 μm x 15 μm)
  • Optical resolution (switchable)/ Frame rate:
    764 x 480 pixels @ 32 Hz
    382 x 288 pixels @ 80 Hz (swichable to 27 Hz)
    72 x 56 pixels @ 1 kHz
    764 x 8 pixels @ 1 kHz (fast linescanning mode)
  • Spectral range: 800 nm
  • Temperature ranges:
     575 ... 1900 °C (27 Hz mode)
     625 ... 1900 °C (80 Hz and 32 Hz mode)
    750 ... 1900 °C (1 kHz mode)
  • Optics:
    FOV @ 382 x 288 px:
    13° x 10° (f = 25 mm)

    FOV @ 764 x 480 px:
    26° x 16° (f = 25 mm)
  • Thermal sensitivity (NETD)1)
    < 2 K (1000 °C) for 27 Hz, 32 Hz and 80 Hz
    < 3 K (1400 °C) for 1 kHz
  • Accuracy: ±1 %(<1500 °C)/ ±1.5 % (>1500 °C) of reading
  • PC interface: USB 2.0 / optional USB to GigE (PoE) conversion
  • High speed analog output (@ 1 kHz mode):
    0 – 10 V real-time output of 8x8 pixels (1 ms response time)

  • Standard Process interface (PIF):
    0 – 10 V input, digital input (max. 24 V), 0 – 10 V output
  • Optional Industrial Process interface (PIF): 
    2x 0-10 V inputs, digital input (max. 24 V), 3x 0 – 10 V outputs,
    3x relay (0 – 30 V/ 400 mA), fail-safe relays

  • Cable length (USB):

    1 m (standard), 5 m, 10 m
    5 m and 10 m also available as HT cable (180 °C)

  • Ambient temperature (TAmb): 5 ... 50 °C
  • Storage temperature: -40 ... 70 °C
  • Relative humidity: 20 - 80%, non-condensing
  • Enclosure (size/ rating): 46 mm x 56 mm x 90 mm / IP 67 (NEMA 4)2)
  • Weight: 320 g, incl. lens
  • Shock3): IEC 60068-2-27 (25 g and 50 g)
  • Vibration3): IEC 60068-2-6 (sinus-shaped)/ IEC 60068-2-64 (broadband noise)
  • Tripod mount: 1/4-20 UNC
  • Power supply: USB 

1) at 27 Hz, 32 Hz and 80 Hz 
2) Only applies when lens protection tube is used 
3) For more details see operator‘s manual 

Product configurator

Areas of application for the thermal imager optris PI 08M

The short-waved infrared camera optris PI 08M is ideally suited for laser processing applications as radiation above 800 nm is blocked excellently. The spectral range of 800 nm is less likely to be influenced by surrounding influences and thus ensures a precise measurement even when facing changing emissivity.

 

Product configurator

Thermography software optris PIX Connect included

All IR cameras are delivered with the thermography software optris PIX Connect, which has been developed specifically for the extensive documentation and analysis of thermal images. It allows you to analyse temperature data in real time as well as the remote control of your infrared camera. Furthermore, you can setup individual alarm levels for your process and define visual or acustic alarm signals.

Our thermography software is licence free and can easily be adjusted to your requirements. 

Product configurator